Titanium for CNC Machine Shops & Job Shops
Stop burning spindle hours squaring raw mill plate or fighting guide-bushing seizure on oversize bars. Through our certified partner facilities, we supply 6-side milled and surface-ground titanium blanks, ISO 286-2 unilateral negative tolerance (h6–h9) centerless-ground bar stock, and cold waterjet near-net profiles — cut to your exact machining allowance in metric (mm) or imperial (in) dimensions.
Market Insight
Pre-squared and surface-ground titanium blanks eliminate first-op skin-pass roughing and abrasive mill-scale tool wear, cutting setup and roughing time on 3-axis and 5-axis machining centers.
Common Titanium Grades
| Grade | Typical Use | View Grade |
|---|---|---|
| Grade 5 (Ti-6Al-4V / UNS R56400 / 3.7165) | 3/5-axis milled housings, structural brackets, Swiss-turned shafts (ASTM B265 / B348 / AMS 4911 / AMS 4928) | View → |
| Grade 2 (CP Ti / UNS R50400 / 3.7035) | Corrosion-resistant manifolds, valve bodies, fluid fittings, anodizing jigs (ASTM B265 / B348) | View → |
| Grade 23 (Ti-6Al-4V ELI / UNS R56407 / 3.7165-ELI) | Medical device blanks, fracture-critical instruments, precision Swiss-lathe pins (ASTM F136 / AMS 4930) | View → |
Shop-Ready Feedstock Matrix: Mill Forms & Pre-Machining Options
Specify your finished part envelope and preferred first-operation condition — we supply metric and inch stock prepared for immediate chucking or fixturing:
| Shop Feedstock Type | Grades & Equivalents | Dimension Range (Metric / Imperial) & Condition | Machining Floor Advantage |
|---|---|---|---|
| 6-Side Milled & Surface-Ground Plate Blanks | Grade 5 (3.7165) & Grade 2 (3.7035) | Thickness 6.35–76.2 mm (0.25"–3.0"), custom-sawn with +0.5 to +3.0 mm (+0.020"–0.120") stock Titanium Plates & Blanks → | Mill scale removed prior to shipment; parallel faces and square reference edges ready for vise jaws or vacuum chucks |
| Centerless-Ground Bar Stock for Swiss & CNC Lathes | Grade 5 (AMS 4928 / B348) & Grade 23 ELI (F136) | Ø3.0–50.8 mm (0.118"–2.000"), ISO 286-2 unilateral h6 / h7 / h8 / h9, chamfered ends Ground Titanium Bars → | Zero positive diameter oversize (+0 / -tol) prevents guide-bushing seizure in bar-fed Swiss turning centers |
| Cold Waterjet & Laser Near-Net Pre-Cut Profiles | Grade 5 & Grade 2 Sheet / Plate | Thickness 1.0–50.0 mm (0.040"–2.0"), nested from DXF/STEP with perimeter finishing stock Waterjet Cutting Service → | Abrasive waterjet leaves zero heat-affected zone (HAZ) or hardened alpha-case edge that chips carbide end mills |
| Saw-Cut Forged Discs, Rings & Custom Billets | Grade 5, Grade 2, Grade 7 & Grade 12 | Ø50–500 mm (2.0"–19.7") per ASTM B381 / B348, band-sawn to single-piece or batch lengths Cut-to-Length Service → | Order exact cut-to-length blanks instead of tying up capital in full mill-length bars or plates |
Feedstock Condition Trade-Off: Pre-Ground Blank vs. Waterjet Near-Net vs. Raw Mill Stock
How choosing the right pre-processing route impacts spindle utilization and tooling life in titanium job shops:
| Shop Criteria | 6-Side Milled / Ground Blank | Cold Waterjet Near-Net Blank | Raw Mill-Finish Plate / Bar |
|---|---|---|---|
| Surface & Edge Condition | Clean machined faces, scale-free | Cold-cut contour, zero thermal alpha-case | As-rolled / pickled mill surface with scale |
| Dimensional Envelope | Custom allowance (e.g. +1.0 mm / +0.040") | DXF contour + perimeter finishing allowance | Standard ASTM B265 / B348 mill tolerance |
| First Operation on Shop Floor | Direct into vise, fixture plate, or collet | Direct to finish profiling and pocket milling | Requires band-sawing, squaring & face roughing |
| Best Suited For | Prismatic 3/5-axis housings & Swiss bar turning | Complex 2D brackets, flanges & frame links | Shops with heavy in-house sawing & roughing |
Key Requirements
- ISO 286-2 unilateral negative tolerances (h6 / h7 / h8 / h9) on centerless-ground bars for Swiss lathes and collet feeders
- Custom per-side machining allowance (+0.5 mm / +0.020" to +5.0 mm / +0.200") with mill scale and alpha-case removed
- Rolling grain direction marking and single heat-lot fulfillment with Material Test Certificate (MTC) and CofC
- Blind / neutral packaging (no supplier markings) and shipping on customer DHL, FedEx, or UPS collect accounts
Common Product Forms
Need Titanium for CNC Machine Shops & Job Shops?
Tell us your application requirements, target grade, and quantity. We will provide a competitive quote with Material Test Certificate (MTC) and heat-lot traceability.
Request a Quote →Related Tools
Weight & Allowance Calculator
Calculate gross blank weight with per-side machining allowance and saw kerf
Tolerance & Allowance Calculator
Look up ISO 286-2 h6–h9 bar tolerances (mm & in) and recommended stock allowance
Grade Equivalency Chart
Cross-reference ASTM, DIN Werkstoff (3.7165 / 3.7035), UNS, and GOST grades
Explore Other Industries
Motorsport & Exhaust Fabrication
Purpose-built titanium tubing and hardware for race exhaust fabricators, performance tuning shops, and motorsport constructors. We supply thin-wall CP Grade 1 and Grade 2 exhaust tubes, precision laser-cut pie cuts, and CNC-machined O2 sensor bungs, V-band flanges, and hangers — ultrasonically cleaned and individually sealed so fabricators can tack and TIG weld straight out of the bag.
Knife Making & EDC Hardware
Precision titanium sheet, bar, and pre-cut blanks for custom folder makers, production knife OEMs, and everyday-carry (EDC) tool manufacturers. We supply double-side surface-ground Grade 5 (Ti-6Al-4V) scale and frame-lock stock, cold waterjet near-net handle blanks, and CNC-turned pivot hardware — with optional rolling grain direction marking and single heat-lot fulfillment for uniform voltage anodizing.
Medical Devices & Implants
Titanium's biocompatibility makes it the gold standard for orthopedic implants, spinal fixation, and dental implants. Grade 23 (Ti-6Al-4V ELI) per ASTM F136 is the most widely used medical titanium.
Marine & Subsea Engineering
Titanium forms a stable, self-healing oxide film that resists pitting and crevice corrosion in natural seawater. Through our certified partner facilities, we supply both mill products and build-to-print CNC-machined subsea pressure housings, heat exchanger tubing, offshore piping spools, and marine fasteners.
Chemical Processing
Titanium equipment lasts decades in aggressive chemical environments where stainless steel fails within months. The lifecycle cost advantage is decisive.
Automotive & Motorsport
High-performance vehicles use titanium for suspension links, connecting rods, valve springs, exhaust components, and chassis fasteners — anywhere unsprung and rotating weight savings directly translate to lap-time reduction.
3D Printing & Additive Manufacturing
Titanium powder for additive manufacturing is the fastest-growing segment. Grade 5 spherical powder for LPBF and WAAM enables complex geometries impossible with traditional machining.
Energy & Oil/Gas
From offshore risers to hydrogen electrolyzers, titanium serves the energy industry in its most corrosive and high-pressure environments.
Humanoid Robotics & Embodied AI
As humanoid robots transition from laboratory prototypes to factory-floor deployment, dynamic payload-to-weight ratio and joint fatigue life become the ultimate engineering bottlenecks. Replacing 7075-T6 aluminum in high-torque rotary actuators, knee/hip load-bearing frames, and dexterous hand linkages with Grade 5 (Ti-6Al-4V), Grade 23 ELI, and high-strength beta-titanium alloys delivers 3x higher fatigue endurance and 55% volume reduction without sacrificing structural stiffness.