TA10 / Gr.12 Titanium-Molybdenum-Nickel Alloy Bars — Daily Production Update
Today’s production spotlight: a fresh batch of TA10 / ASTM Gr.12 titanium-molybdenum-nickel alloy raw bars, stacked and marked on our workshop floor.
Material: TA10 (ASTM Gr.12 / Ti-0.3Mo-0.8Ni)
TA10 is a near-alpha titanium alloy with additions of molybdenum (0.2–0.4%) and nickel (0.6–0.9%). Compared to commercially pure titanium, Gr.12 offers significantly improved crevice corrosion resistance in hot brine, wet chlorine, and reducing acid environments — making it a go-to choice for:
- Chemical processing — heat exchangers, reactor vessels, and piping
- Oil & gas — sour-service downhole components
- Marine desalination — evaporator tubes and plate heat exchangers
- Power generation — condenser tubing in coastal plants
Today’s Batch
This run includes raw bars (unfinished billets) in two diameters:
| Diameter | Grade | Quantity |
|---|---|---|
| Φ60 mm | TA10 / Gr.12 | Multiple pieces |
| Φ75 mm | TA10 / Gr.12 | Multiple pieces |
Each bar is marked with its grade and diameter for full traceability through the production chain.
What Happens Next
These raw bars will be ultrasonically inspected, then machined or forged to customer specifications — turned bars, shafts, fastener blanks, or valve components. We can supply TA10 bar stock from Φ10 mm up to Φ300 mm, in both forged and rolled conditions.
Need Gr.12 titanium alloy bars or custom machined parts? Contact us for pricing and lead times.
Related Articles:
Need this material? Get a factory-direct quote.
